Professional Manufacturer of Fiber Optic Products

Fast Install Connector hot Melt

Product Name: Fast Install Connector (FIC) hot Melt
Brand: Anfkom
Raw Materials:
Using Life:20 Years
Loading Port: Shenzhen, Shekou
MOQ: 100pcs
Packing: Plastic Box
Shipping Mark: Anfkom
Lead Time: 15-20 days
Country of Origin: China

Send Inquiry

You can make an inquiry about this product.
Your e-mail will not be leaked.

  • Product Detail

Fast Install Connector Hot Melting Type uses mature melting technology, and transfers the traditional melting point from the O-fiber melting box or melting modular part to the inside of the connector, it not only simplifies the management point of the O-fiber but also supports the production of the fixed-length patch cord. This product is adapted to the connection of fiber 2.0*3.0 drop cable, indoor 2.0/3.0 tail fiber and patch cord, can be applied to FTTH, reformation of the old ODF in Tele-communications room and the new patch cord of ODF on site
Adopt tail screw device, apply to drop cable
and conventional indoor cable
Inside use mature melting heat-shrink tube
Please use the special FTTH melting machine

ITEM Technical Parameters
Applicable for  Drop cable. Indoor cable
Optical fiber diameter 125μm (657A 657B)
Tight buffer diameter 250μm
Fiber mode  SM
Operation time About 100s(no fiber cut)
Insert loss ≤ 0.3dB(1310nm & 1550nm)
Return loss ≤ -50dB
4M height dropping test (3 times) < 0.2dB(Insert loss variety)
High-temperature test < 0.2dB (3000 hours 85℃ )
Low-temperature test: < 0.2dB (3000 hours -40℃ )





Mail to us