Fiber Distribution Terminal Cabinet FDT(07)

Description

This product is applicable to optical transmssion network and optical acess network,which realize not only the connection&scheduling of optical fiber and cable,but also the end connection between the main cable and wiring cable,it can be installed with optical splitter.
can be used for both outdoor and indoor
When the optic cable is introduced into the box,the bending radius is more than 15 times of its diameter,when the optic cable goes through a metal plate hole or structure along the sharp edage,the bending radius of the fiber core or the pigtail is more than 30mm
The tray module is convenient to replace the adapter,considering the dust and transportation and other factors,the tray cover can cover the adapter and the splicing zone.

Stucture:

The body is made of highly qualified cold rolled steel.the surface is precessed by electrostatic spraying with special plastic powder.connected by a hinge structure,the door can be reopened 5000 times without damage.anti-theft door lock system is in accordance with the mechanical anti-theft lock provision of public security standard GA/T 73-94 in china
The cable access the cabinet from the bottom through independent inlet and outlet holes,the holes meet the requiement of full match.
The sealing putty ensures the cable lead-in hole to be well sealed,which prevent water or rodent animal getting into cabinet.the sealing putty resists high temperature and flowing,doesn’t solidifty at low temperature,will expand when encounter moisture,which achieves the sealing requirements.
The box ensure the electrical conduction,has a perfect grounding system
The inside structure is divided into cable distribution area,storage area and the outer cable into line area.the upper main body is divide into 2 installation area for integrated trays and splitter trays separately.the splitter tray installation area is configured according to the user’s requirement,which is universal to the integrated tray installation area.12 core integrated tray is made of flame retardant ABS,the left cable outing mode meets the cable splicing,pigtail storage and jump fiber terinal etc.
The mechanical moving part is flexible,the insertion and pulling is moderate,the locking is reliable,and the installation and maintenance are convenient.the door opening angle is no less than 120 degree,the gap is less than 3mm with firm structure.the assembly has the consistency and compatibility with no loose fasteners