Description:
Crimping Machine for FC,ST,SC,MU,LC and E2000 Fiber Optic Connectors.It can be used in the fiber optic connector assembly and other product compression connection assembly,taking compressed air as power, Through solenoid valve control movement, the operation simple security.
Highlights:
The crimping machine is used for assembling fiber optic connectors/ceramic ferrules and fiber optic adapters;
Pressure of the machine is adjustable;
It is available for different kinds of fiber optic connectors(Such as FC,ST,SC,MU,LC,E2000,etc);
Easy to handle, High quality and efficiency.
DC24V 1A power supply
Use air pressure of not less than 0.6 ~ 0.9Mpa, the maximum pressure 1000kgf.
Performance:
This product work by the air cylinder and the lever principle, through replacing compression jigs,can adapt different components assembly and compression.The pressure can be adjusted by the foots witch. the operation is simple and reliable,the processing efficiency is high,the processing quality is stable,the maintenance is simple and convenient.
Basic Information:
1 | Net Weight | 14kg |
2 | Size | 360mm*245mm*325mm |
3 | Work barometric pressure | ≥0.5Mpa |
4 | Automatic | Yes |
Operating procedures:
access compressed air pressure not less than 0.2 KG/CM,
access DC24V power supply
to adjust mould port, consistent, parallel
will be pressure to end the handle into the port, press the foot switch