Fiber optic patch leads are designed to connect two fiber optic devices, it has a connector at each end. LC is a small form factor connector, which can save space. LC to LC fiber optic patch lead is a perfect choice for high-density application, like data center.
Fiber optic patch leads are classified by transmission distance(long (Single mode)or short distance(Multimode)), by connector type, by polish type(PC or APC). It is easy to be identified by color(cable jacket color, connector color). Yellow always means SM while Orange means Multimode. Blue means PC while Green means APC.
Not only LC connector, anfkom also provides other connectors. SC, ST, FC, MRTJ, E2000. All these connectors can be used to make fiber optic patch leads.
Fiber optic patch leads LC to LC
Fiber optic patch leads SC to SC
Fiber optic patch leads FC to FC
Fiber optic patch leads ST to ST
Fiber optic patch leads MTRJ to MTRJ
Fiber optic patch leads E2000 to E2000
Anfkom fiber optic patch leads have 3 features:
- Low insertion loss, IL can reach 0.1db if required.
- Long life-time, all are made of totally new material.
- 100% tested in the factory.
FTTH(Fiber to The Home)
LAN(Local Area Network)
FOS(fiber optic sensor)
Fiber Optic Communication System
Optical fiber connected and transmitted equipment
Defense combat readiness