Fiber Optic Polishing Machine Square Type

Feature

Can process most kinds of standard fiber optic connectors,such as FC/UPC,SC/UPC,ST/UPC,LC/UPC,MU/UPC,FC/APC,SC/APC,MT-RJ,E2000 etc
Adapt to four corners pressurized,jig will be installed stable
Compact size
Excellent connector end force polishing quality
Designed for volume production , high productivity(Can polishing 18-40 connectors per time)
Save material and low cost for grinding
Made by high quality,hardened steel S136

Specification:

1. Polishing Material specification for A-20A polisher:

Remark:User should use the recommended polishing liquid and polishing films for A-20A polisher. We could not ensure the polishing quality meet user’s requirements if other types of polishing liquid and films were used.

2.PC/UPC (R20) Standard Polishing Results
PC/UPC(R20)
Polishing Process:4 processes (not including“Remove Glue”)
Return Loss: ≥50 dB
Top Curvature:10~25 mm
Top Excursion:≤50 nm
Core Hollow:≤0.1 um
Surface Roughness:≤50 nm

3.General Technical Parameters
Machine Size:L240(mm)X W240(mm)X H260(mm)
O.D. of Rotation Plate:127 mm(5 inch)
Time Settings:99 min 99 sec (Max)
Speed for Rotation Plate:90 rpm
Height of Plate Jumpiness:<10 um
Pressure Configuration:21 ~ 36 N/cm2
Work Temperature:10 ~ 40 Celsius degrees
Relative Humidity:15%~85%
Noise:unloading Less 50 dB
Libration:Working Status 0.25g5~100Hz10min
Stopping Status 0.50g 5~100Hz 10min
Power Input:220~230 VAC50Hz/60Hz
Electric Power:40 W
Net Weight:24 kg

4.Storage Condition
Temperature: -40 ~ 80 Celsius degrees / -40℃~85℃
Relative Humidity:15%~85%
Libration:1.0g 5~100Hz 45min

5. Options for Polishing jigs