Thick Walled HDPE Microduct is designed for direct burial. Its superior blowing characteristics and sufficient thickness of the subduct Walls often result in no additional protective ducts required. Thick-walled micro ducts can be branched off easily and the primary tube can be directly buried as a single micro duct. All TW ducts are silicone coated. Available Tracer Wire, Ripcords installed.
As part of air blown fiber solution, the micro duct is designed for deploying the air blown fiber. There are several types of micro ducts used in different applications. some can be installed in the new or existing conduits to improve the conduit capacity, while others can be directly buried. They are made of different materials with different structures. HDPE is the most popular material.
Each micro duct is a pathway for fiber. You can leave some spare ducts at the initial installation. It will be very convenient to expand your network according to the real demand in future. You just need to blow new fibers into the spare ducts. This job can be finished in a very short time without any interruption to the existing network.
Micro ducts have a size ranging from typically 3 to 16 mm and are installed as bundles in larger ducts. As a manufacturer of micro ducts, anfkom can provide all the components required for the whole micro duct system.
Φ12/8mm Series: | |||||
O.D.(mm) | Max. Tensile Strength (N) | Min. Bend Radius (mm) | Crush(N) | Weight (kg/km) | |
2-ways | 14.4*26.4 | 1960 | 220 | 2000 | 198 |
4-ways | 31.4 | 3500 | 440 | 2000 | 355 |
7-ways | 38.4 | 5600 | 650 | 2000 | 565 |
Φ12/9mm Series: | |||||
O.D.(mm) | Max. Tensile Strength (N) | Min. Bend Radius (mm) | Crush(N) | Weight (kg/km) | |
4-ways | 35 | 5200 | 500 | 2000 | 475 |
7-ways | 42 | 6600 | 680 | 2000 | 696 |
Φ14/10mm Series: | |||||
O.D.(mm) | Max. Tensile Strength (N) | Min. Bend Radius (mm) | Crush(N) | Weight (kg/km) | |
4-ways | 30.4*30.4 | 4200 | 500 | 2000 | 425 |
7-ways | 44.4 | 6800 | 750 | 2000 | 675 |