Professional Manufacturer of Fiber Optic Products

How to set up fiber optic patch cord production line–materials guide

Fiber Optic Polish Film

Polishing Films are made of diamond, silicon carbide and aluminum oxide and in 0.03, 0.5, 1,3, 6, 9, 15 and 30um. They are ideal for polishing fiber optic connectors in various grit and particle sizes

Polishing Rubber Pad

Fiber Optic Polishing Rubber Pad for fiber optic connector and optical fiber
polishing. Polishing Pad are made of silica gel

Polishing Oil

Polishing Oil helps polishing of fiber optic connectors when using 9um polishing films, make the lifetime of polishing films longer and polishing performance better.

Polishing Liquid

Polishing Liquid helps final polishing of fiber optic connectors when using 0.03um polishing films, make the lifetime of polishing films longer and final polishing performance better.

Kimwipes

Kimwipes, nearly lint free, soft and non-abrasive, are used to clean the stripped and cleaved optical fibers and connector endface by using alcohol from Alcohol Dispenser Bottle.

Alcohol Dispenser Bottle

Alcohol Dispenser Bottles are designed to dispense alcohol and applied with a swab or wipe to clean the stripped and cleaved optical fibers.
It includes a hinged lid to keep out impurities while the bottle is not in use and the stainless steel parts facilitate the use of aggressive solvents.

Epoxy 353ND

Epoxy 353ND has two parts of Part A and Part B, which will be mixed with 10:1 ratio. The air inside will be defoamed, and then Epoxy will be injected into the connector ferrule, and lastly the ferrule with Epoxy will be cured by Curing Oven until Epoxy turns into reddish-brown color.

Cable Marker

Cable marking is essential and helpful when installing cables. This will ensure the right patch cords and cables are connected correctly to avoid unnecessary connection errors.
The snap-on markers have numbers from 0-9 and letters from A-Z for applying easily and securely on both ends cables and patch cords. This provides positive identification and allows error-free installation of your critical systems. The marks are permanent and chemical resistant, and suitable for standard Ø3mm and Ø2mm cables and patch cords and other various cables.

Bare Fiber Adaptor

Bare fiber adapter are used as the medium to link the bare optical fiber to fiber optic equipment.The bare fiber optic adapters have the bare optical fiber inside on one side;the other side of the adapter is a connector that can plug into the equipment.We supply SC,FC,and ST bare fiber adapters,they are used to quickly and easily terminate the fiber to the equipment.

Piano Wire

Piano Wire to remove the broken optical fiber from fiber optic connectors and bare fiber adapters, like SC/FC/ST/LC/MU, etc

master cord

Master optical patch cord are required for testing in optical networks, calibration services and for manufacturing fiber optic components. A master patch cord is terminated by master connectors that fulfill the strict demands on geometrical and transmission parameters according to defined specifications.

Master Adapter

Master adapter are required for testing in optical networks, calibration services and for manufacturing fiber optic components,normally we use seiko master adapter

Fiber Optic Cable

we can choose difference fiber optic cable according to customer’s requirements

Fiber Optic Connector

Normally need SC,FC,LC,ST,MTRJ,MU etc connectors

Epoxy Injection Syringe

Epoxy Injection Syringe is used for injecting Epoxy into fiber optic connectors’ ferrules

Also need below tools

Fiber Scriber

Fiber Scriber use for fiber cutting

Visual Fault Locator

Pen type VFL is specially designed for field personnel who need an efficient and economical tool for fiber tracing, fiber routing and continuity checking in optical network

Prev
Next

Related Posts

Leave a Reply

*

*

Skype

WhatsApp

WangWang

QQ

Mail to us