Web Management Media Converter

Overview

10/100/1000M auto-adapted Ethernet Fiber Media Converter (Or called Photoelectrical Conversion) with management function, which supports SNMP Protocol,remote Telnet management,Com port management and software upgrade. It can supervise the working condition and configure the mode of each local media converter in the slot and remote media converter connected to the other side.

10/100/1000M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX, 1000Base-T, 1000Base-X and IEEE 802.3x International Standard etc. It can completely be cooperated with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also provide cost-efficient hardware support to the information transmission of Broadband private network and Fiber Optical citywide LAN.

Feature

Supports SNMP management, Web address management and Telnet management
Enable/Disable optical link-loss alarm function
Four transmission modes are selectable
Comply with IEEE 802.3μ 100BASE TX, IEEE802.3 10BASE-T standard and 1000Base-T/FX
Comply with IEEE 802.1Q VLAN protocol
Support 10/100/1000M, Full/Half duplex auto-negotiation
Support MDI/MDIX auto sense
Support transmission distance of up to 120km (Dual-fiber)
Support over-size packets of up to 10240 Byte
Support hot-swappable
The cards work as standalone and rack-based Media Converters
Single-fiber and dual-fiber devices are available