Professional Manufacturer of Fiber Optic Products

FTTH Drop Cable Patch Cord

Product Name: FTTH Drop Cable Patch Cord
Brand: Anfkom
Raw Materials: Corning or YOFC fiber,US kevlar
Using Life:20 Years
Loading Port: Shenzhen,Shekou
MOQ: 10pcs
Packing: Carton Box
Shipping Mark: Anfkom
Lead Time: 5-20 days
Country of Origin: China

Send Inquiry

You can make an inquiry about this product.
Your e-mail will not be leaked.

  • Product Detail

FTTH drop cable patch cord is an FTTH cable assembled with standard connectors such as SC/LC/ST/FC at either end. It is usually used to connect the subscriber to the terminal of a distribution cable, bring the optical signal from outdoor to indoor. It improves the efficiency of deploying since no splicing is required. It saves time hence save money.

All kinds of FTTH cable are available, such as Butterfly Flat Indoor FTTH Drop Cable,  FTTH Aerial Self-support Drop cable.


FTTH drop cable patch cord is preconnectorized in the factory and will pass strict test procedure before shipping to the customer.


Low Insertion Loss,High Return Loss
Good Repeatability and Interchangeability


Fiber CATV and Fiber Network System


ITEM Technical Parameters
Applicable for 3.0×2.0mm Drop cable, 3.0/2.0mm cable
Optical fiber diameter 125μm
Tight buffer diameter 250μm
Fiber mode Single mode
Operation time About 10s (no fiber cut)
Insert loss ≤0.3dB (1310nm &1550nm)
Return loss UPC≥50dB, APC≥60dB
Fastening strength of naked fiber 5N
Fastening strength of naked fiber holder 10N
Tensile strength 50N
Operating temperature ‐45~+80°C
On‐line tensile strength(20N) IL≤0.2dB RL≤5dB
Mechanical durability(500 times) IL≤0.2dB RL≤5dB
Drop‐off test (drop‐off height 4m, once per direction, totally 3 times) IL≤0.2dB RL≤5dB





Mail to us