MTP/MPO trunk cable is designed for high-density applications, especially for data center, it facilitates rapid deployment, provides an efficient way to install a large number of cables and can reduce installation time and save space. It serves as a permanent link connecting the MTP/MPO modules to each other.
Anfkom provides 12F, 24F, 36F, 48F, 72F, 96F, 144 fibers/cores MTP/MPO trunk cables that support 12-strand and 24-strand in single-mode or multimode. MPO trunk cables are pre-terminated, fully tested and packed with test reports in the factory.
MPO trunk cable meet Standard:
Meets IEC Standard IEC-61754-7; JIS C5982; TIA-604-5(FOCIS5); Telcordia GR-1435-CORE compliant
Structured cabling per TIA-568-C
Parallel Optics
-Optical Internetworking Forum (OIF) Compliant
– InfiniBand Compliant
InfiniBand
– 10G Fiber Channel Compliant
– 40G and 100G IEEE 802.3
– QSFP
Pre-terminated MTP Technology-Polarity
The three polarity methods Type A, Type B, and Type C are used to guarantee the right bi-directional allocation.
Please Note: When it is connected with two 40G QSFP+ transceivers, please choose the Type B Cross as polarity; when it is connected with other equipment such as MTP LGX Cassette, you can choose any of the polarities as you need.
Features:
Low insertion loss, high return loss
MT-based Multi-fiber Connector, 36-144 fiber connector terminations and assemblies
Economical solution for mass-termination of fiber
Designed for low loss and standard loss SM and MM applications
Ruggedized round cable, oval cable and bare ribbon options available
Color-coded housings available to differentiate fiber type, polish type and/or connector grade
Good in repeatability and exchangeability
MTP Interference index
Connector type | Testing items | Min | Max |
MTP PC | ROC_X(abs)(mm) | 500 | \ |
ROC_Y(abs)(mm) | 50 | \ | |
Angle_X(deg) | -0.2 | 0.2 | |
Angle_Y(deg) | -0.2 | 0.2 | |
Max.DH.All Fiber(nm) | -600 | 600 | |
Max.DH.Ave(nm) | -300 | 300 | |
Max.DH.Adj(nm) | -300 | 300 | |
Max. Core Dip(nm) | -300 | 300 | |
Fiber height(nm) | -300 | 300 | |
ROC_X(abs)(mm) | 1000 | 3000 | |
MTP APC | ROC_X(abs)(mm) | 500 | \ |
ROC_Y(abs)(mm) | 50 | \ | |
Angle_X(deg) | -0.2 | 0.2 | |
Angle_Y(deg) | 7.8 | 8.2 | |
Max.DH.All Fiber(nm) | -600 | 600 | |
Max.DH.Ave(nm) | -300 | 300 | |
Max.DH.Adj(nm) | -300 | 300 | |
Fiber height(nm) |
Note: Maximum Bandwidths of Different Multimode Fibers
OM1-62.5um Core-10GBit up to 33 meters, gigabit up to 300m
OM2-50um Core-10GBit up to 82 meters, gigabit up to 500m
OM3-50um Core,Laser Optimized-10GBit up to 300 meters,gigabit up to 1000m
OM4-50um Core, Laser Optimized-10GBit up to 550 meters, gigabit up to 1000m