The MPO Breakout cable is with MTP or MPO connector at one end, while at the other end is SC standard connector. It is designed for data centers and wiring closets – one MPO or MTP connector to 4, 6, or 12 duplex SC connectors. It is widely used to support 10G to 40G, 25G to 100G, and 100G to 400G.
Feature :
Small volume, high fiber density
4,8,12,24 cores available
PC(plane) and APC(8) are available
Both direct and crosspatch cords are available
Application :
Connection of trunk lines
Switching between trunk line and distribution line
High integrated equipment and devices
High-density cable wiring system
Specification :
Item | Unit | Parameter | ||||
MPO/MTP Connector | — | Standard SM MT Ferrule | Low Loss(Elite) SM MT Ferrule | Standard MM MT Ferrule | Low Loss MM MT Ferrule | |
Insertion Loss | Typical | (dB) | 0.35 | 0.20 | 0.35 | 0.20 |
Maximum | (dB) | 0.75 | 0.35 | 0.60 | 0.35 | |
Return Loss | (dB) | ≥60 for APC (8 Angle Polish) | ≥20 for PC | |||
(dB) | ≥50 for PC | — | ||||
Male/Female | (dB) | Male: With Pins, Female: Without Pins | ||||
Tensile Strength | (dB) | ≤0.3 (Max 66N) | ||||
Vibration | (dB) | ≤0.3 (10 ~ 55Hz) | ||||
Thermal Cycle | (dB) | ≤0.3 (-40 ~ 75℃, 21Cycles) |